ANTIFERENCE Conexer DMHD01 Manual de usuario

USER MANUALDIGITAL MODULATOR DMHD01AV TO DVB-T ENCODER/MODULATOR

4.4.2 Changing the AUDIO settings4.5 The TS settings menu • Set the NIT version• Set the Network ID.• Set the Original Network ID.• Set the Network Na

4.6 The Language menuSelect your preferred language in this menu.4.7 Default CongurationWhen selecting this option, all your modications will be los

5 - Programming using a PCThe settings of the DMHD01 can also be changed using a PC. First, please install the software DMHDiFace on your PC. You can

Congratulations on your purchase of the DMHD01 This ‘state of the art’ product, is an HD encoder. The video input can be taken from HDMI, PC or Compo

1 SAFETY CONSIDERATIONS1.1 Connecting to the mains supply This product has to be connected to the mains supply. If there is the slightest doubt concer

C1 Power supply input of the modulator (5 VDC / 4 A)C2 USB input (for programming the DMHD01 by PC)C3 Ethernet connection RJ45 C4 RF input C5

3.2 Powering UpPlug in the connector of the power supply. The display will show the CONEXER logo while booting. Once the modulator has booted correctl

3.3 - Menu StructureThe DMHD01 has different menus allowing easy access to the different parameters and to change them when necessary. Below you will

• Set the output frequency• Set the bandwidth• Set the output level7DMHD014 Setting up the DMHD14.1 - Conguring the MenuIn this menu you can set up y

4.2.1 Setting the DVB-T parametersWhen you select the DVB-T and press the enter button, the following submenu appears. It allows you to set the DVB-

9DMHD014.3 - The IP setting MenuWhen your DMHD01is congured as IP Streamer, then you can adjust the settings in the IP settings menu.• Set the UDP or